Friday, July 24, 2015

walton primo ef3 free latest flash tool, firmware & driver download

walton primo ef3 free latest flash tool, firmware & driver download

Walton Primo EF3 Official firmware download here




ef3.png

Basic Information:
Operating System: Android 4.4.2

Processor: 1.2 GHz Quad Core Processor
GPU: Mali 400
RAM: 1GB
Storage Space (ROM): 8 GB
Expandable Memory up to 32GB

Call Mode: Dual card dual standby


Network Parameters:
Network Type: UMTS+GSM
Network Band: GSM 850/900/1800/1900MHz, UMTS 2100 MHz
Network Speed: GPRS / EDGE/ 3G / HSPA+

Screen Parameters:
Screen Size: 5 inch FWVGA
Resolution: 854*480, Support 16.7M color

Touch & Protector: Capacitive touch screen

Camera Parameters:
Rear Camera:  5 MP Auto Focus with LED Flash

Sensor Type: CMOS
Front Camera: VGA

Video Recording: Full HD (1080p) (1920x1080)
Flash: Yes

Multimedia:
1080p Full HD video playback
Radio: Support with recorder

Connectivity:
Wi-Fi 802.11 b/g/n, Bluetooth, Micro USB,
WLAN Hotspot, OTA Upgrade Enabled


Sensors:
Motion sensors: Accelerometer (3D)

GPS module: GPS with A-GPS network-assisted GPS navigation function

Battery Capacity: 2000mAh
Type: Li-ion battery

Weight:  165g (with battery)
Dimension: 142 X 72.7X 9.4 mm


Special Features:
OTA Support
Unified storage

Flash Tool download link here

driver download link here

Firmware download link here


1. Install the drivers

2.Open Flash Tool

image.png

3. Pac Loading
a. Click "Load Packet". (number "a" showed in the image). New window will appear.
b. Enter "Primo EF3 After Sales" folder and select "Walton_PrimoEF3_AfterSales.pac" file (number "b" showed in the image).
c. Click "Open" (number "c" showed in the image)

image.png

4. Now Click Firmware Upgrade (Click "Start")

image.png

5. Connect The Handset

After clicking the "Start", press the volume down key of your handset, and connect it to your computer with USB cable. Remember: Before connecting the handset with your computer, you must turn it off. Also notice that the battery has to be kept inserted. Flash operation will begin, you will see this window:

image.png

6. There will appear "Passed". This means it is successful. 
   Disconnect phone, open battery and reconnect again (If non-removable). Enjoy!!

image.png



No comments:

Post a Comment